Eavestrough Repair Guelph
Guelph Eavestrough Installation Experts
Eavestroughs divert rainwater from the roof to the ground in a controlled way. An eavestrough system prevents water accumulation around the foundation, which can cause basement flooding and damage the foundation. An eavestrough system is also essential because it protects the siding and shingles, prevents mould and mildew formation, as well as nesting of birds, rodents, mosquitoes, termites, and other pests on the eavestroughs, and improves the curb appeal of your home, among other benefits.
If you want your eavestrough system to work as it should, it has to be in perfect working condition. Traditional eavestrough systems have to be cleaned and repaired regularly to prevent clogging. At Trades by Jack, we have years of experience in eavestrough repair Guelph and cleaning.
Guelph experiences frigid winters, which calls for eavestrough heaters to prevent snow and ice build-up on the roof and the eavestroughs to prevent untold water damage. We offer eavestrough heater installation services. If you are not satisfied with your current eavestrough system, the LeafGuard gutter systems, for which we are the exclusive dealer in Guelph and the GTA, could be the solution. This patented debris shedding system features a sturdy one-piece design and is guaranteed to never clog. Our specialists use the best materials to keep the exterior of your home in perfect condition, no matter the weather. Call us today for comprehensive eavestrough installation, repair, and cleaning services.
Guelph Eavestrough Installation Process
Your eavestrough should be installed by an experienced professional to ensure it works as it is meant to. We have an efficient and effective eavestrough installation process.
Step 1: We begin by inspecting the damage to the current eavestrough system to identify the problem, which will help prevent a recurrence of the same. We then prepare the area for the installation. This involves getting rid of fascia board sections that have mould or rot and covering the fascia board. Preparation also involves installing the gutter brackets that will support the gutters.
Step 2: Once the area is adequately prepared, we cut the eavestroughs to ensure they fit. We do the cutting at the site to ensure a perfect fit. We then apply the gutter end caps and mark out and cut where the downspout will be located.
Step 3: Finally, the eavestrough is ready for hanging. We use brackets every 18 to 24 inches and ensure that gutter end caps are attached to the fascia board for stability. We then install the downspouts using elbows and finalize the installation by applying a sealant on all holes and elbows. The installation process takes less than a day, and we waste very little material.
Without a properly functioning eavestrough system, your Guelph home is at risk of basement flooding, foundation damage, landscape erosion, leaks, and pest infestation. Hiring the Trades by Jack team for eavestrough installation ensures that your eavestrough is installed professionally. We have been installing eavestroughs in Guelph for many years and know what works and what doesn’t.
Signs That You Need to Repair the Eavestroughs of your Guelph Home
Some eavestrough problems are fairly typical, but fortunately, most can be addressed easily and quickly. Here are common signs that tell us you need eavestrough repair Guelph:
- Water leaking: If you notice leaks anywhere along the eavestrough system, you need urgent repairs. Leaks can be due to seams that have given way in sectional eavestroughs, holes, punctures, or cracks. These can be easily fixed if the problem is not too drastic.
- Eavestroughs that are pulling away: If you notice your eavestroughs are not attached to the house in some places, you have a problem. Pulling away is mostly caused by debris build-up, rotten fascia board, or ice/snow damage.
- Orange drips down the downspouts: Drips of orange down the downspout and other signs of rust need urgent attention.
- Water running down the side of your house: If water is running down the side of your house instead of through the eavestrough system, this is most likely due to drip flashing. This is the metal strip that connects the eavestrough to the roofline. In such situations, you need to replace, repair, or reposition the drip flashing.
- Sagging and water pooling: These problems are usually caused by improper sloping of the eavestrough system.
- Missing sections: If a section of the eavestrough system has been blown away or carried away by rainwater, it needs immediate replacement.
Why Choose Us
Here at Trades by Jack, we know your home is important to you. Our goal is to help you take the best care possible care of it. Ensuring that your eavestroughs are in good working condition is very important in home maintenance since it protects your home from water damage. Our eavestrough repair Guelph technicians have extensive experience in exterior building projects involving eavestroughs, siding, fascia, and soffit.
Some eavestrough problems require cleaning, others require repairs, and others require complete replacement. We are here for you, no matter how simple or complex the problem is. We keep you off the ladder, which is important given that the Ladder Safety Institute puts annual ladder-related injuries at more than 160,000. The LeafGuard eavestrough system does not clog, eliminating the need to go up the ladder.
Guelph experiences heavy rain and cold winters. Ensure the eavestroughs are in good working condition by scheduling an inspection, especially before winter and the rainy season. After an eavestrough inspection, we will advise you if they require cleaning, repair or replacement. Common issues that require repair include sagging, overflowing, pulling away, leaks, and pooling water. Our team has the experience, tools, and equipment necessary to do all sorts of eavestrough repair Guelph, including:
- Re-sloping: If the eavestrough is not slanted or is slanted too steeply, it will not function as it should. The general rule of the eavestrough slope is 1/4-inch per 10 feet of eavestroughs. We recalibrate the sloping to prevent issues like water spilling over to the side.
- Realigning the eavestrough system to a more effective configuration: An improperly aligned eavestrough system will cause backflow and overflowing.
- Fixing leaks: Leaks are caused by cracks, holes, and loose fasteners. We fix leaks by applying the manufacturer-recommended sealant, glue, or adhesive. We first clean the area thoroughly and dry it before applying the sealing agent.
- Replacing affected sections: If a piece of the eavestrough is extensively damaged or missing, we will replace it for you. We also replace fascia and soffit boards that are rotting due to water damage.
- Downspout repairs: Downspout elbows and cross-sections sometimes get loose or damaged. We will re-attach them for you.
- Adding extensions to redirect water: Water should be directed as far away from the foundation as possible. We will add extensions to the bottom end of the downspout to redirect the water from your home.
- Fixing eavestrough joint separation: We fix eavestrough joint separation, which is one of the most common eavestrough problems. This prevents damage to the walls, fascia, roofing material, and the eavestrough itself.
Clogging of the eavestrough system causes water to overflow, which can cause untold water damage. Clogging also provides a good place for birds, rodents, and bugs to nest and reproduce. Other reasons why you should do regular eavestrough cleaning are to extend the lifespan of your roof and eavestrough system and boost your home’s curb appeal.
You should clean your eavestrough system once every season or at least twice a year (during the fall and spring when more leaves, twigs, branches, and other debris fall). The more the debris, the more regular the cleaning should be.
Avoid the common temptation of DIY eavestrough cleaning. Here are 4 reasons cleaning should be done by a professional.
- Inspection and repairs: A professional will first inspect the eavestrough system and then carry out necessary repairs such as fixing holes and missing sections.
- Equipment: A professional has the equipment and supplies necessary to reach even the most hard-to-reach parts of the eavestrough system.
- Experience: Experience goes a long way in eavestrough cleaning. It means quicker turnaround time and better results.
- Safety: Eavestrough cleaning is deceptively difficult since you have to balance on the ladder and clean at the same time. Ladder falls are potentially fatal. A professional eavestrough cleaner has the necessary safety gear and experience to do the job safely.
With the LeafGuard system, you no longer have to worry about regular eavestrough cleaning. The LeafGuard system has a unique, patented 1-piece debris-shedding design that guarantees your gutter never clogs. At Trades by Jack, we are the exclusive dealer of the LeafGuard system in Guelph. Other than reducing cleaning frequency, this system also helps you prevent water damage, including:
- Rotting soffit boards and fascia boards
- Mould and mildew
- Basement flooding and leaks
- Foundation damage
- Landscape erosion
- Insect and bird nesting problems
Do not take chances! Talk to your experts about installing the LeafGuard system.
The LeafGuard System Protects Your Guelph Home from Water Damage
The LeafGuard system goes a step further compared to traditional gutter systems by preventing clogging, thanks to its patented debris shedding design. LeafGuard systems are strong and durable, handling up to 32 inches of rain per hour. This protects your home from such common water damage as:
- Basement leaks and flooding
- Foundation damage
- Rotting fascia and soffit boards
- Landscape wash-out
- Mould and mildew
- Roof problems
- Insect and pest nest problems
Every Guelph property needs an eavestrough system to prevent water damage. The system should be in good working condition, meaning regular cleaning and repairs are necessary. However, sometimes repairs are not enough – complete replacement is required. So, when do you know you need to replace your eavestrough?
- Constant leaks: A small crack can be fixed using a sealant, adhesive, or glue. However, if the cracks or fractures are many or extensive, it is time to replace your eavestroughs.
- Missing sections: Sometimes, entire sections of sectional eavestrough systems pull away, fall off, or are blown off during strong winds. If the sections are significantly large, it is time to replace the eavestrough.
- Sagging and pulling away: Sagging issues soon develop to the eavestroughs pulling away. A common cause of this is a low-quality eavestrough system, which will need to be replaced.
- Pooling water: If you notice water is pooling at different points, this is an indication that the eavestrough system is giving way and needs replacement.
At Trades by Jack, we install LeafGuard gutters in Guelph. These gutters are leak-proof and guaranteed not to cause clogging. They come in different styles, shapes, and colours. Reach out to us for the best gutters in the market.
Eavestrough Heater Installation
An eavestrough heater consists of cables that keep the eavestroughs and the roof from collecting ice and snow. They are self-regulating, which saves you money on energy costs. Guelph homes need eavestrough heaters because de-icing prevents water damage, helps prevent accidents from falling icicles, increases the life of your eavestrough system and roof, and helps you avoid regular repairs. Contact the Trades by Jack team if you need eavestrough heaters installed.
Get a Free Quote
At Trades by Jack, we offer free, no-obligation quotes. Call us for more information on eavestrough cleaning, repair, replacement, and heating in Guelph.